Sanyo PLV-WF20, Service Manual

Page: 70 / 238

-70-
Electrical Adjustment
Service Adjustment Data Table
These initial values are the reference data written from the
CPU ROM to memory IC when replaced new memory IC. The
adjustment items indicated with “
✻
” are required to readjust fol-
lowing to the “Electrical adjustments”. Other items should be
used with the initial data value.
GROUP NO. ITEM FUNCTION RANGE INITIAL VALUE NOTE
0 Temperature Monitor Indication
0 LM76 (Temp) Monitor (°C) Temp. Sensor (Intake) – –
1 LM76 (Temp) Monitor (°C) Temp. Sensor (Inner) – –
2 Thermistor Monitor (°C) Temp. Thermistor (Inner) – –
3 Thermistor Monitor DAC value – –
1 Pressure Monitor Indication
0 MPXA4114A(Pressure) Monitor Pressure Sensor – –
1 MPXA4114A(Pressure) Monitor Pressure Sensor (mmHg) – –
2 MPXA4114A(Pressure) Monitor Pressure Sensor (hpa) – –
4 Flow Sensor Monitor (Read only)
0 Flow Sensor Monnitor Flow Sensor – –
10 RS232C Set
0 Baud rate RS232C Baud rate (0 : 19200 / 1 : 9600) 0 / 1 0
11 PJ-Net Set
0 Reset Disable PJ-Net Reset (0 : Enable / 1 : Disable) 0 / 1 0
20 Logo On/Off
0 Logo On/Off (0 : Menu Operation / 1 : Prohibition) 0 / 1 0
30 Color Shading / Gamma Correction
0 Color shading Correction On/Off (0 : Off / 1 : On) Not memorized 0 / 1 1
1 Gamma Correction On/Off (0 : Off / 1 : On) Not Memorized 0 / 1 1
40 Dimmer Control
0 Dimmer On/Off (0 : Menu Operation / 1 : Off) 0 / 1 1
1 Dimmer Level LAMP1 (0 : 264W ~ 15 : 330W) 0 ~ 15 15
2 Dimmer Level LAMP2 (0 : 264W ~ 15 : 330W) 0 ~ 15 15
3 Dimmer Level LAMP3 Not used 0 ~ 15 –
4 Dimmer Level LAMP4 Not used 0 ~ 15 –
50 Auto Picture Control
0 Auto Picture On/Off (0 : Menu Operation / 1 : Off) 0 / 1 1
80 Projector Time
0 Projector Time Reset 0 ~ 10 0
91 Projector Error Logs History
0 Warning_Log_1 Latest Error Log 0 ~ 32767 0
~ : : :
49 Warning_Log_50 50th older Error Log 0 ~ 32767 0
50 Warning_Log_Reset Resets the logs when the value set to 10. 0 ~ 10 0
100 Shutter Operation
0 PRE_MOTION Pre-Motion Enable (o: Enable, 1: Disable) 0 ~ 1 0
1 CMP_TRM Chattering Detection Time 0 ~ 65535 0
2 OUT_DLY_TRM Output Time 0 ~ 65535 0
3 CMP_CHK_CNT Detetion Count 0 ~ 15 0
4 OPEN_DLY Open Delay Time 0 ~ 63 0
5 CLOSE_DLY Close Delay Time 0 ~ 63 0
113 Reset Frequency Counter
0 Lamp 1 Lamp 1 Total Lighting Time 0 ~ 127 0
1 Lamp 2 Lamp 2 Total Lighting Time 0 ~ 127 0
2 Lamp 3 Not used 0 ~ 127 –
3 Lamp 4 Not used 0 ~ 127 –
115 Lamp Go Out
0 Lamp Go Out 0 : Disable / 1 : Enable 0 / 1 0
116 Lamp Replace Display
0 Lamp Replace Display 0 : Disable / 1 : Enable 0 / 1 1
117 Lamp Life Test
0 Lamp Life Test Enable 0: Disable / 1: Enable For safety test 0
1 Lamp Om time 1
2 Lamp Off time 3
3 Lamp Total time 0
130 75 ohm Terminate / Analog filter