Sanyo PLC-XU50, Service Manual

Page: 9 / 90

-9-
Mechanical Disassemblies
1
Remove 2 screws
A
(M3x8), 3 screw
B
(M2.5x6) and disconnect terminal
“K8D” on the Main Board.
2
Pull the Cabinet Front forward off and remove 1 screw
C
(T3x6) to take the
R/C Board off.
3
Disconnect terminal “K8P” on the Main Board and remove fan “FN902”.
x
Cabinet Front, R/C Board, FN902 removal
A
C
R/C Board
Fig.2
1
Remove 7 screws
A
(M2.5x6) and 2 screws
B
(M2.5x6).
2
Remove a shield cover (black) and disconnect terminals “K8N”, “K6L”,
K8H”, “K8P”, K5B”, “K5G”, “K5R”, K6J”, “K8R” and “K8S” on the Main
Board.
3
Remove main board upward off.
c
Main Board removal
Main Board
A
B
B
B
FN902
A
A
A
A
A
A
A
B
B
Fig.3