Sanyo PLC-XU301, Service Manual

Page: 43 / 112

-43-
Electrical Adjustments
Group/
Item
Item Name Function Initial range Note
8 DIMMER_CTRL_LEVEL9
Luminance Level 9 Data for Dimmer:
Dim Level 9 at the less than the
Value
63 0-55
9 DIMMER_CTRL_LEVEL10
Luminance Level 10 Data for
Dimmer: Dim Level 10 at the less
than the Value
70 0-55
10 DIMMER_CTRL_LEVEL11
Luminance Level 11 Data for
Dimmer: Dim Level 11 at the less
than the Value
77 0 - 55
11 DIMMER_CTRL_LEVEL1
Luminance Level 1 Data for
Dimmer: Dim Level 1 at the less
than the Value
84 0 - 55
1 DIMMER_CTRL_LEVEL13
Luminance Level 13 Data for
Dimmer: Dim Level 13 at the less
than the Value
91 0 - 55
13 DIMMER_CTRL_LEVEL14
Luminance Level 14 Data for
Dimmer: Dim Level 14 at the less
than the Value
98 0 - 55
14 DIMMER_CTRL_LEVEL15
Luminance Level 15 Data for
Dimmer: Dim Level 15 at the less
than the Value
105 0 - 55
15
DIMMER_AVERAGE_POINT
Luminance Data Avarage Point for
Mimmer
4 0 - 16
16 DIMMER_AVERAGE_DATA
Luminance Data Avarage Value for
Dimmer
- - * Read only
17 DIMMER_LEVEL_AUTO Current Dimmer Leverl - - * Read only
18 DIMMER_LEVEL_NORMAL Normal Dimmer Level 8 0 - 15
19 DIMMER_LEVEL_ECO Eco Dimmer Level 0 0 - 15
0 Lamp check enable 0
0: Lamp Failure Detection OFF
(White 50% Back), 1 : ON (Blue
100% Back)
1 VOLTAGE_LEVEL Lamp Voltage - Unit: 8bit(Raw Data) * Read only
DIMMER_LEVEL_HIGH Dimmer level High 15 0 - 15
Group
231
VBI Slice level
0 Generic Initial Slicing Level PW190 register 0xE344 0x34 0-55
1 Generic High Level Threshold PW190 register 0xE345 -- 0-55
Generic Low Level Threshold PW190 register 0xE346 -- 0-55
3 Generic Minimum Low Level PW190 register 0xE347 0x30 0-55
4 Generic Maximum High Level PW190 register 0xE348 0xe0 0-55
Group
250
FAN control
0 FAN1 MIN ADJUST (DAC)
DAC Output for Fan
Adjust the tolerance of DAC and Fan
Volage.
* Lamp mode is forced Eco
10 0 - 55
1 FAN1 MAX ADJUST (DAC) 5 0 - 55
FAN MIN ADJUST (DAC) 10 0 - 55
3 FAN MAX ADJUST (DAC) 5 0 - 55
4 FAN3 MIN ADJUST (DAC) 15 0-55
5 FAN3 MAX ADJUST (DAC) 55 0-55
6 Not used
7 Not used
Group
251
Not used
Group
252
Fan option
0 HI-LAND SWITCH
0: Normal, 1: Hi-Land, -4: Hi-Land
1-3
0 0 - 5
1 SAFETY SWITCH For test purpose 0 0 - 6
FAN MANUAL SWITCH 0: Auto, 1: Manual 0 0 - 3
3 FAN1 MANUAL VOLTAGE
Fan Voltage (unit : 0.1V)
Effective only when Fan Manual
switch is 1
100 0 - 55
4 FAN MANUAL VOLTAGE 100 0 - 55
5 FAN3 MANUAL VOLTAGE 100 0 - 55
6 Not used -
Group
253
Fan tem error Setting (Memorized) Normal Ceiling HiLand-
Normal
HiLand-
Ceiling
5 Temp A Warning (Normal)
Temp. A to judge the Temp Error at
Normal (Room)
4 4 41 41 30-100
6 Temp B Warning (Normal)
Temp. B to judge the Temp Error at
Normal (Panel)
60 60 60 60 30-100
7 Temp C Warning (Normal)
Temp. C to judge the Temp Error at
Normal (Lamp)
60 60 60 60 30-100
8 Temp B-A Warning (Normal)
Temp. B-A to judge the Temp Error at
Normal (Clogging Det.)
100 100 100 100 0-100