Sanyo PLC-XU301, Service Manual

Page: 45 / 112

-45-
Electrical Adjustments
Group/
Item
Item Name Function Initial range Note
1 Lamp Vol Threshold
Threshold to judge Lamp Voltage
Down ( V×10)
0 30-90
Fan1 Speed Gain
Additional Fan Speed of Min at Lamp
Voltage Down (unit: 0.1V)
10 0-55
3 Fan Speed Gain 10 0-55
4 Fan3 Speed Gain 10 0-55
Group
257
Fan dimmer Setting
0 Dimmer Average Chech
Period
Dimmer Average measurement Time
(0:10sec. 1:30sec. :60 sec. 90:
sec...10:30sec.)
1 0-10
1 Dimmer Average Dimmer Average Value (Read only) -
Last Voltage Difference -
3 Voltage Difference Goal -
Group
258
FAN network mode Ic temp.
0 Standby Cooling Check
Cycle
Standby Cooling Check Cycle 5 -
1 Standy Cooling Start
Threshold
Standy Cooling Start
Threshold
40 -
Standby Cooling Enable Standby Cooling Enable 1 -
Group
260
Auto calibration(common)*Auto calibration
0 Execute Calibration 0 0 - 1
Executes Auto-Calibration when
changiing the Value (PC White
100%)
1 Loop Count
Maximum Execution Times (OFFSET-
>GAIN)
10 1 - 30
Auto Status
Result of Auto-Calibration (Last
Memory)
0 0 / 1 / 9
0: OK, 1: Adjusting,9: Error *
ReadOnly
3 AutoWait Wait Value for each setting 1 1 - 0
4 CHECK -Tolelance Torelance of OFFSET 1 - 55
Group
261
Auto calibration (rGB)
0 OFFSET AREA H START
Black Level Acquiring Area H-Start
Position
975 0 - 1000
1 OFFSET AREA V START
Black Level Acquiring Area V-Start
Position
500 0 - 1000
GAIN AREA H START
White Level Acquiring Area H-Start
Position
5 0 - 1000
3 GAIN AREA V START
White Level Acquiring Area V-Start
Position
500 0 - 1000
4 Image AREA H WIDTH Black/White Level Acquiring Area 13 0 - 4095
5 Image AREA V HIGHT
Black/White Level Acquiring Area
Height
9 0 - 4095
6 OFFSET target Target Value of Black Level Adj. 3 0 - 17
7 OFFSET torelance Torelance of Black Level Adj. 1 1 - 17
8 GAIN target Target Value of White Level Adj. 38 0 - 55
9 GAIN torelance Torelance of White Level Adj. 1 1 - 55
Group
262
Auto calibration (cVBS/SVIdeo)
0 Y Image Area Start X Y Acquiring Area H-Start Position 0 0 - 1000
1 Y Image Area Start Y Y Acquiring Area V-Start Position 00 0 - 1000
Cb Imange Area Start X Cb Acquiring Area H-Start Position 500 0 - 1000
3 Cb Imange Area Start Y Cb Acquiring Area V-Start Position 00 0 - 1000
4 Cr Imange Area Start X Cr Acquiring Area H-Start Position 500 0 - 1000
5 Cr Imange Area Start Y Cr Acquiring Area V-Start Position 00 0 - 1000
6 Image Area H Width Image Level Acquiring Area 8 0 - 4095
7 Image Area V Hight Image Level Acquiring Area Height 9 0 - 4095
8 Y Target Level Target Value of Y Level Adj. 17 0 - 55
9 Cb Target Level Target Value of Cb Level Adj. 1 0 - 55
10 Cr Target Level Target Value of Cr Level Adj. 1 0 - 55
11 Gain Tolerance Torelance of Level Adj. 1 0 - 55
1 Delta Gain Deviation Width of Gain Value 9 0 - 55