Sanyo PLC-XU101, Service Manual

Page: 40 / 108

-40-
Electrical Adjustments
Group/
Item
Item Name Function Initial Range Note
14 Temp C-A Warning (Eco)
Temp. C-A to judge the Temp Error at Normal
(Clogging Det.)
100 100 100 100 0-100
15 Temp A Warning Offset (Temp)
Offset of Temp Error (Temp.)
Error Setting Value is increased XC at the
below condition
* Standby
* Right to turn on the lamp
*Right to change the Lamp mode
5 0-100
16 Temp B Warning Offset (Temp) 5 0-100
17 Temp C Warning Offset (Temp) 15 0-100
18 Temp B-A Warning Offset (Temp) 0 0-100
19 Temp C-A Warning Offset (Temp) 0 0-100
20 Temp A Warning Offset (Time)
Offset of Temp Error (Minutes)
Error Setting Value is increased X minute at
the below condition
* Standby
* Right to turn on the lamp
*Right to change the Lamp mode
5 0-100
21 Temp B Warning Offset (Time) 5 0-100
22 Temp C Warning Offset (Time) 18 0-100
23 Temp B-A Warning Offset (Time) 1 0-100
24 Temp C-A Warning Offset (Time) 1 0-100
25 Factory Mode For factor use 0 0-1
Group 254 Fan Control Range Setting (Temp./Voltage) Normal Ceiling
HiLand-
Normal
HiLand-
Ceiling
0 High Fan Control Min Temp
Temp Senser Control Start/End Temp. at High
40 40 44 44 20-100
1 High Fan Control Max Temp 46 46 44 44 20-100
2 High Fan1 Min
Fan voltage value at High (unit: 0.1V)
75 75 135 135 0-255
3 High Fan1 Max 135 135 135 135 0-255
4 High Fan2 Min 85 85 130 130 0-255
5 High Fan2 Max 130 130 130 130 0-255
6 High Fan3 Min 75 80 80 85 0-255
7 High Fan3 Max 80 85 80 85 0-255
8 High Fan4 Min 9999 9999 -
9 High Fan4 Max 9999 9999 -
10 Normal Fan Control Min Temp
Temp Senser Control Start/End Tem.p at
Normal
40 40 44 44 20-100
11 Normal Fan Control Max Temp 46 46 44 44 20-100
12 Normal Fan1 Min
Fan voltage value at Normal (unit: 0.1V)
67 67 125 125 0-255
13 Normal Fan1 Max 125 125 125 125 0-255
14 Normal Fan2 Min 75 75 120 120 0-255
15 Normal Fan2 Max 120 120 120 120 0-255
16 Normal Fan3 Min 70 65 75 70 0-255
17 Normal Fan3 Max 75 70 75 70 0-255
18 Normal Fan4 Min 9999 9999 -
19 Normal Fan4 Max 9999 9999 -
20 Eco Fan Control Min Temp
Temp Senser Control Start/End Tem.p at Eco
38 38 44 44 20-100
21 Eco Fan Control Max Temp 44 44 44 44 20-100
22 Eco Fan1 Min
Fan voltage value at Eco (unit: 0.1V)
57 57 115 115 0-255
23 Eco Fan1 Max 115 115 115 115 0-255
24 Eco Fan2 Min 70 70 110 110 0-255
25 Eco Fan2 Max 110 110 110 110 0-255
26 Eco Fan3 Min 55 55 55 55 0-255
27 Eco Fan3 Max 55 55 55 55 0-255
28 Eco Fan4 Min 9999 9999 -
29 Eco Fan4 Max 9999 9999 -
Group 255 Fan Start/Cooling Setting
0 Fan1 Initial Volt
Fan Start Voltage (0.1V)
70 0-255
1 Fan2 Initial Volt 70 0-255
2 Fan3 Initial Volt 70 0-255
3 Not used 9999 -
4 Fan1 Cooling Speed Fan Voltage at Power Off (0.1V) 130 0-255
5 Fan2 Cooling Speed 130 0-255
6 Fan3 Cooling Speed 130 0-255
7 Not used 9999 -
8 Cooling Time L1
Cooling Time stting at Fan Mode L1 (x 30 sec)
1: 30, 3: 90, 15: 450 sec.
2 1-15
9 Cooling Time L2
Cooling Time stting at Fan Mode L2 (x 30 sec)
1: 30, 3: 90, 15: 450 sec.
3 1-15
10 Temp Error Cooling Time Cooling Time setting at Temp Erro (x 30 sec) 3 1-15
11 OnStart Cooling Start Threshold 38 0-100
12 After shutdown cooling Cooling after shutdown (0: No, 1: Yes) 1 0-1
Group 256 Fan Lamp Voltage Down Setting
0 Lamp Voltage Current Lamp Voltage (0.1V)(Read only) - 0-255
1 Lamp Vol Threshold
Threshold to judge Lamp Voltage Down ( V×
10)
30-90