Sanyo PLC-XU101, Service Manual

Page: 12 / 108

-1-
z
Cabinet Top, Front and R/C Board removal
Mechanical Disassembly
Mechanical disassembly should be made following procedures in numerical or-
der.
Following steps show the basic procedures, therefore unnecessary step may
be ignored.
Caution:
The parts and screws should be placed exactly the same position as the original
otherwise it may cause loss of performance and product safety.
Screws Expression
(Type
Diameter x Length
) mm
T type M Type
(T3x10)(Black)x5
Cabinet front
R/C Board
Fig.1
(M.5x6)
Cabinet top
(M.5x6)x
((Tx6)
1. Remove the cabinet top (Before removing the cabinet top,
open the Lens cover fully).
. Remove the Cabinet front.
3. Remove the R/C board.
Lens cover