PLC-XTC50AL Expand Serial Command Functional Specifications
41/76
8.10.13 CF_FANSPEED Command
Command “CF_FANSPEED_%1” [CR]
%1
“MAX” ------------------------------ Select maximum fan speed
“NOR” ------------------------------ Select normal fan speed
Details
Switch Fan Control Speed mode.(Available only in the normal Power ON status)
The status set by this command is stored in EEPROM and setting remains
effective even after the power is turned to ALL OFF status.
Response
Acceptable
“000” [CR]
Unacceptable
“Error Code” [CR]
8.10.14 CF_SLANT Command
Command
“CF_HIGHLAND_%1”[CR]
%1
“OFF” ----------------- Install a projector at L3 degree angle in front projection,
or at L4 degree angle in ceiling projection
“L1” ------------------- Slant a projector at L1 degree angle
“L2” ------------------- Slant a projector at L2 degree angle
“L3” ------------------- Install a projector at L3 degree angle in Ceiling projection
“L4” ------------------- Install a projector at L4 degree angle in front projection
“UP” ------------------ Switch forward (Off -> L1 -> L2 -> L3 -> L4 -> Off)
“DN” ------------------ Switch backward (Off -> L4 -> L3 -> L2 -> L1 -> Off)
Details
Switch slant of the projector installed.
(Available only in the normal Power ON status)
The status set by this command is stored in EEPROM and its setting is effective
after ALL is OFF.
Response
Acceptable
“000”[CR]
Unacceptable “Error Code”[CR]
8.10.15 CF_SHUTRCPROT Command
Command
“CF_SHUTRCPROT_%1” [CR]
%1
“ON” ------------------ Disable RC key from controlling Shutter (Protection On)
“OFF” ----------------- Enable RC key to control Shutter (Protection Off)
Details
Set valid / invalid of RC use on Shutter control function
(Valid only when in the normal Power ON status)
Response
Acceptable
“000” [CR]
Unacceptable “Error Code” [CR]
8.10.16 CF_SHUTKEYPROT Command
Command
“CF_SHUTKEYPROT_%1” [CR]
%1
“ON” ------ Disable key on the top panel from controlling Shutter (Protection On)
“OFF” -------- Enable key on the top panel to control Shutter (Protection Off)
Details
Set valid / invalid use of key on the top panel on Shutter control function.
(Valid only when in the normal Power ON status)
Response
Acceptable
“000” [CR]
Unacceptable
“Error Code” [CR]
