PLC-XTC50AL Expand Serial Command Functional Specifications
38/76
8.10.3 CF_BACKGND Command
Command “CF_BACKGND_%1” [CR]
%1
“BLUE” -------------------- Select Blue Back
“USER” ------------------- Select User
“BLACK” ------------------ Select Black Back
“UP” ---------- Switch forward (Blue Back
→
User
→
Black Back
→
Blue Back)
“DN” --------- Switch backward (Blue Back
→
Black Back
→
User
→
Blue Back)
Details
Set Screen status for no signal.(Available only in the normal Power ON status)
The status set by this command is stored in EEPROM and the setting remains
even after the power is turned to ALL OFF status.
*When
％
1=”USER” is received, error code “101” is returned, in the case of
Capture non-practice.
Response
Acceptable
“000” [CR]
Unacceptable
“Error Code” [CR]
8.10.4 CF_FILCTL Command
Command
“CF_FILCTL_%1” [CR]
%1
“ROLL” ---------------------- Execute operation of scroll of filter
Details
Execute operation of scroll of filter
Response
Acceptable
Acceptable
Unacceptable
Unacceptable
8.10.5 CF_POINTER Command
Command “CF_POINTER_%1_%2”[CR]
%1
“SPOTLIGHT” --------------- Select Spotlight
“ARROW” --------------------- Select Arrow
“FINGER” --------------------- Select Finger
“LASER” ---------------------- Select Laser mark
%2
“MAX” ------------------------- Spotlight Large
“MID” -------------------------- Spotlight Medium
“MIN --------------------------- Spotlight Small
Details
Select Pointer display. (Available only in the normal Power ON status)
Note1) %2 is valid only when “SPOTLIGHT” is specified in %1. When
“ARROW”/”FINGER”/”LASER” is specified in %1, the command should
be “CF_POINTER_%1”[CR].
Note2) When “SPOTLIGHT” is specified in %1, %2 cannot be omitted.
Response
Acceptable
“000”[CR]
Unacceptable
“Error Code”[CR]
