background image

3

Network Unit

OWNER’S MANUAL

Preparation

ENGLISH

Expression/Abbreviation

The following abbreviations may appear in this manual:

Windows 95, Windows 98, Windows 2000, 

Windows Me, Windows XP, Windows NT4.0

Windows

Macintosh, Power Macintosh

Macintosh

Mac OS 8 or later

Mac OS

In some cases, the “PJ-Net Organizer” is explained as “this product” or “Network
Unit” in this manual. The word “projector” found in this manual means “projector
provided with PJ-Net Organizer” unless otherwise noted.

Use of this manual

This manual does not provide the description of basic operation and functions for
computer, web browser, projector and network. For instructions about each piece of
equipment or application software, please refer to the respective booklet.

CAUTION ON USE IN NETWORK

- When you receive an alert e-mail from the projector, you must check the projector

immediately. Fire or accident may result if the projector is used in an abnormal

condition.

- When you install the projector at remote location and use it through the network,

you must perform the safety inspections periodically. In this case you must pay

attention to the change of environment in which you installed the projector. It may

cause fire or an accident depending on the change of environment.

CAUTION 

SANYO Electric Co. Ltd assumes no responsibility for the loss or damage of data or
damage of the computer caused by use of this product.

Summary of Contents for PJ-NET ORGANIZER POA-PN10



























































































Reviews: