PDG-DXL2000 Expand Serial Command Functional Specifications
35/72
8.10.3 CF_AUTOSETUPPCADJ Command
Command
“CF_AUTOSETUPPCADJ_%1”[CR]
%1
“ON” ------------------- Set Auto PC ADJ. function to ON
“OFF” ------------------ Set Auto PC ADJ. function to OFF
Details
Set/Cancel Auto PC adj. function
This command is available in normal Power ON status.
Note) It is unable to set both PC ADJ. and Input search to OFF.
If projector receives Auto PC ADJ. OFF command while Input search is OFF, it
returns error code “101”.
Acceptable
“000”[CR]
Response
Unacceptable
“Error Code”[CR]
8.10.4 CF_INPUTSEARCH Command
Command “CF_INPUTSEARCH_%1”[CR]
%1
“OFF” ------------------------- Set Input search operation to OFF
“ON1” ------------------------- Set Input search operation to On1
“ON2” ------------------------- Set Input search operation to On2
Details
Set Input search operation mode.
The status set by this command is stored in EEPROM and its setting is effective
after ALL is OFF
This command is available in normal Power ON status.
Note) It is unable to set both PC ADJ. and Input search to OFF.
If projector receives Input search OFF command while Auto PC ADJ. is OFF, it
returns error code “101”.
Acceptable
“000”[CR]
Response
Unacceptable “Error Code”[CR]
8.10.5 CF_AUTOSETUP Command
Command
“CF_AUTOSETUP_%1”[CR]
%1
“START” ------------------- Execute Auto Setup
Details
Execute Auto Setup
Note) CF commands does not execute while Auto setup is in process. If the
command is sent during this, projector returns error code “302”
Acceptable
“000”[CR]
Response
Unacceptable
“Error Code”[CR]
8.10.6 CF_3D SET Command
Command
“CF_3DSET_%1”[CR]
%1
“ON” ------------------- Select ON
“OFF” ------------------ Select OFF
“NVIDIA”--------------- Select NVIDIA 3D VISION
Details
Setup 3D function.
The status set by this command is stored in EEPROM and its setting is effective
after ALL is OFF.
This command is available in normal Power ON status.
Acceptable
“000”[CR]
Response
Unacceptable
“Error Code”[CR]
