Sanyo Katana LX, User Manual

Page: 47 / 165

Adjusting the Alert Volume
You can set the alert volume separately from the ringer
volume setting.
1.
Press
> Settings > Sounds > Volume >
Advanced...
.
2.
Select
Alarms
,
Text Message
,
Picture Mail
,
Voicemail
, or
VoiceSMS
.
3.
Using the navigation key, select Separate Vol.
4. Press the navigation key right or left to choose a
volume level and press
Done
(left softkey).
Alert Notification
Set your phone to alert you with an audible tone when
you change service areas, a call has been connected,
there are messages, or your network signal is fading as
well as once a minute during a voice call.
1.
Press > Settings > Sounds > Alerts .
2.
Select
Beep Each Minute
,
Out of Service
,
Connect
,
Signal Fade/Call Drop
, or
Messaging
.
n
If you select
Messaging
, select
Text Message
,
Picture Mail
,
Voicemail
, or
VoiceSMS
.
3.
Use your navigation key to select a setting and
press .
Silence All
The Silence All option allows you to mute all sounds
without turning your phone off.
To activate Silence All:
© With the phone open, press the volume key down
repeatedly in standby mode. (The screen will display
“Silence All.”)
To deactivate Silence All:
© With the phone open, press the volume key up
repeatedly to select a volume level.
Tip You can make the ringer vibrate at any volume level
by checking
Always Vibrate .
Section 2B. Settings 35
S
e
tt
in
g
s