Sanyo Katana LX, User Manual

Page: 31 / 165

Making Calls
Placing a call from your wireless phone is as easy as
making a call from any landline phone. Enter the
number, press
, and you’re on your way to clear calls.
To make a call using your keypad:
1. Make sure your phone is on.
2.
Enter a phone number from standby mode. (If you
make a mistake while dialing, press
to erase the
numbers.)
3.
Press or . (To make a call when you are
roaming and Call Guard is enabled, see “Using Call
Guard” on page 57.)
4.
Press or close the phone when you are finished.
You can also place calls from your phone by using
Automatic Speech Recognition (ASR, page 83), speed
dialing (page 26), and by using your History listings
(page 61).
Dialing Options
When you enter numbers in standby mode, press
Options
(right softkey) to display the following dialing
options.
v Abbrev. Dial
to place a call using the abbreviated
dialing feature. (See “Using Abbreviated Dialing” on
page 25.)
v Save
to save the phone number in your Contacts. (See
“Saving a Phone Number” on page 24.)
v Hard Pause
to insert a hard pause. (See “Dialing and
Saving Phone Numbers With Pauses” on page 24.)
v 2-Sec. Pause
to insert a two-second pause. (See
“Dialing and Saving Phone Numbers With Pauses” on
page 24.)
Tip To redial your most recent call (outgoing, incoming,
or missed), press
TALK
twice.
When making calls off the Sprint National Network,
always dial using 11 digits (1 + area code + phone
number).
Section 2A. Phone Basics 19
P
h
o
n
e
B
a
s
ic
s