Sanyo ECO G SGP-EW120M2G2W, Technical Data Manual

Page: 9 / 115

Outdoor unit
2. Specifications
B-5
Model No. SGP-EW150M2G2W
External dimensions (mm)
Height 2,248
Width 1,800
Depth 1,000 (+60)
Weight (kg) 790
Performance (kW)
Cooling capacity
45.0
Heating capacity (Standard)
50.0
Heating capacity (low temp.) 53.0
Hot Water (Cooling mode) 16.0 (@75°C outlet)
Generate electricity power source
220 to 240 V, 50 Hz,
Single-phase
Electrical rating
Cooling
Running amperes (A) 6.18
Power input (kW) 1.35
Power factor (%)
95
Heating
Running amperes (A)
4.57
Power input (kW) 1.01
Power factor (%) 96
Starting amperes (A) 30
Gas Type
Gas Band
P Propane gas (G31)
H natural gas (G20)
L Natural gas (G25)
E natural gas (G20)
Gas consumption (kW)
Cooling 31.6
Heating (Standard) 36.1
Heating (low temp.) 47.3
Compressor
Cooling oil (L)
（
type
） 7.5 (HP-9)
Crankcase heater (W) 30
Paint color (Munsell code) Silky Shade (1Y8.5/0.5)
Notes
1. Cooling and heating capacities in the tables are determined under the test conditions of JIS B 8627.
Operating condition Cooling Heating (standard) Heating (low temp.) Heating (cold environ.)
Indoor air intake temp. 27°CDB/19°CWB 20°CDB 20°CDB/15°CWB or less 20°CDB/15°CWB or less
Outdoor air intake temp. 35°CDB 7°CDB/6°CWB 2°CDB/1°CWB -10°CDB/-11°CWB
・
Effective heating requires that the outdoor air intake temperature be at least –20°CDB or –21°CWB.
2. Gas consumption is the total (high) calorific value standard.
3. Outdoor unit operating sound is measured 1 meter from the front and 1.5 meters above the floor (in an
anechoic environment). Actual installations may have larger values due to ambient noise and reflections.
4. Values in parentheses ( ) for refrigerant gas and liquid types are those when the maximum piping length
exceeds 90 meters (equivalent length). (Reducers are available locally.)
5. Specifications are subject to change without notice.
6. Hot water heating capacity is applicable during cooling operation as in Note 1.
Engine
Displacement (L) 2.488
Rated output (kW) 10.0
Oil
Type Sanyo Genuine
Quantity (L) 46
Starter motor 12 V DC, 2.0 kW
Starter type
AC/DC conversion type DC
starter
Engine cooling water
Quantity (L) 27
Concentration, Freezing
temperature
50 V/V%, –35°C
Cooling water pump rated
output (kW)
0.16
Refrigerant type, Quantity (kg)
HFC [R410A] , 11.5
Air intakes Front and Rear
Air outlet Top
Piping
Refrigerant gas (mm)
φ 28.58(brazed)
(
φ
31.75) (Note 4)
Refrigerant liquid (mm)
φ
12.7(brazed)
(
φ
15.88) (Note 4)
Balance (mm)
φ
9.52(flared)
Fuel gas R3/4 (Bolt, thread)
Exhaust drain (mm) φ 25 .Rubber hose (length: 200)
Hot water supply in/out Rp3/4 (Nut, thread)
Operating noise level dB(A)
57
Ventilation System
Type
Propeller fans (x2)
Air flow rate (m
3
/min) 380
Rated output (kW) 0.70×2
Drain heater (W)
40