Setup menu settings
63
The connection information registered in the "
Connect
"
dialog at the time of connection is displayed as a list in the
"
Site
" list.
Allows the user to add, change, delete the registered
information or set a channel name.
b
Registering the additional DVR (Addition)
1
Click "Addition".
The "
Addition
" dialog is displayed.
2
Input the information necessary to the connection
such as the address.
The input method is the same as the one used for the
"
Connect
" dialog at the first connection.
• Site Name:
Name of the administrator
• IP Address/Port No:
The IP address and port
number set in the DVR
• Protocol:
TCP/UDP
• Password:
The network password set in the DVR
3
Select the number of channels on the DVR (4/8/16
CH) using the "CH Mode".
4
Click the channel in the "Channels" list and click
again on the reversed blue display.
The input box is displayed.
5
Input the channel name.
The specified name is displayed on displays such as
the camera video.
Set a channel name for each channel following the
same procedure.
6
Click "OK".
The "
Addition
" dialog close and the site is added to the
"
Site
" list.
b
Modify the registered content (Modify)
1
Click the site to be modified in the "Site" list.
The line of the selected site is highlighted in blue.
2
Click "Modify".
The "
Modify
" dialog is displayed.
3
Modifying the registered content displayed in the
dialog.
4
Click "OK".
The "
Modify
" dialog shuts down and the "
Site
" list is
updated.
Memo:
No channel name is set when connected.
To set channel names use "
Modifying registered
content (Modify)
".
b
Remove a registered site (Remove)
1
Select the site to be removed in the "Site" list.
The line of the selected site is highlighted in blue.
2
Click "Remove".
The "
Remove
" dialog close and the "
Site
" is removed
from the "
Site
" list.
Click [OK] once the above settings are complete.
The content of the settings are confirmed and saved.
B
Camera designation settings (Site)
1
6
5
4
2
3
L8HBT_WA(DSR-2116_2108)(GB).book 63 ページ ２００９年５月２７日 水曜日 午後４時５０分
