Sanyo DSR-2108 Instruction Manual Download Page 23

Page: 23 / 92

Recording

This unit allows the following recording modes.

Select the recording mode, recording resolution, frame rate
and video quality from "

RECORD

" under the MAIN MENU.

(P35)

The symbol on the right side of each recording mode (Ex: R)
is displayed while recording is in progress.

Types of recording modes

Real time recording (R) .................................. P16

Records manually videos being monitored.

CONTINUOUS recording (C) ........................... P17

Records continuously when this unit is turned on.

MOTION recording (M)..................................... P17

Records when set off by the motion sensor integrated in this
unit.

ALARM recording (A) ...................................... P18

Records when set off by a sensor connected to the external
alarm terminal (ALARM IN) of this unit.

SCHEDULE recording...................................... P19

Records according to the daily time slot set under the TIMER
SET screen of the recording settings.

Memo:

Setting the OVERWRITE (P47)

ON:

Continues recording by overwriting earlier
data even when the hard disk capacity is full.

OFF:

Stops recording operations once the hard disk
capacity is full.

To manually start recording, press the REC/STOP
button while monitoring live video.

" is displayed on the recording display and recording

starts.

Memo:

When operated manually, the unit records according
to the settings for real time recording (REAL-TIME
REC SET). (P36)

Press the REC/STOP button once operations are
complete.

" disappears from the recording display and real time

recording is stopped.

• The initial screen requests a password. (P38)

• It is possible to cancel the password request.

See "Settings for no password" (P38)

Real time recording

• When recording rate is high, the audio may be difficult

to hear at the time of playback and playback time may
increase.

• Recording time varies depending on the screen being

recorded. Furthermore, recording rate may decrease
depending on the settings.

CH1

2009/05/03 09:04:54

L8HBT_WA(DSR-2116_2108)(GB).book 16 ページ２００９年５月２７日　水曜日　午後４時５０分

Summary of Contents for DSR-2108





























































































Search results

Summary of Contents for DSR-2108

Reviews:

Related manuals for DSR-2108

Brands by name

Popular brands

Sanyo DSR-2108, Instruction Manual

Search results

Summary of Contents for DSR-2108

Reviews:

Related manuals for DSR-2108

Brands by name

Popular brands