UK5 Specification of expanding serial command
Status command
Ver.
Rev.A
Page
26
8. 10. 11 CF_ON PROG Command
Command
“
”[CR]
“
”
Release On Program
“
”
AV1 is selected after Power is On
“
”
RGB is selected after Power is On
“
”
AV2 is selected after Power is On
“
”
AV3 is selected after Power is On
“
”
DVI is selected after Power is On
“
”
PC is selected after Power is On
“
”
NETWORK is selected after Power is On
“
”
Select forward ( Off → AV1 → RGB → AV2
)
“
”
Select backward (On → PC → DVI → AV3 → AV2 → RGB
)
Detail
Set up and release On Program
Available only normal Power ON condition.
Once assigned ON/OFF mode is stored in
, the selected language is
effective.
Receiving OK
“
”[CR]
Status
Receiving NG
“Error code”[CR]
8. 10. 12 CF_WINTER MODE Command
Command
“
”[CR]
“
”
Set up Winter mode ON
“
”
Set up Winter mode OFF
“
”
Select forward On → Auto
→
Off → On →
“
”
Select backward On → Auto
→
Off → On →
Detail
Set up Winter mode ON / AUTO / OFF
Available only normal Power ON condition.
Receiving ON command while Winter mode is active, the Winter mode keeps on
effective.
Status “
” is returned
Receiving OK
“
”[CR]
Status
Receiving NG
“Error code”[CR]
8. 10. 13 CF_PANEL_PROTECT Command
Command
“
”[CR]
“
”
Set up Panel protect ON
“
”
Set up Panel protect OFF
“
”
Select forward On → Off → On →
“
”
Select backward On → Off → On →
Since only On
Off are selectable, UP
DN is the same operation.
Detail
Set up Panel protect ON/OFF
Available only normal Power ON condition.
Receiving Paneled ON command while Panel ON is effective, the panel ON
keeps on effective.
Status “
” is returned
Receiving OK
“
”[CR]
Status
Receiving NG
“Error code”[CR]
