UK5 Specification of expanding serial command
Item
The table of executive command
Ver.
Rev.A
Page
9
5. Functional Execution
Command
5.
. Image control Command
Execute command
Item
CF_BRIGHT_%1[CR]
Set Brightness value.
CF_CONT_%1[CR]
Set Contrast value.
CF_COLOR_%1[CR]
Set Color value.
CF_TINT_%1[CR]
Set Tint value.
CF_SHARP_%1[CR]
Set Sharpness value.
CF_WBAL[CR]
Set White Balance Mode.
CF_WBAL-R_%1[CR]
Set White Balance Red value.
CF_WBAL-G_%1[CR]
Set White Balance Green value.
CF_WBAL-B_%1[CR]
Set White Balance Blue value.
CF_NZRED_%1[CR]
Set Noise reduction mode.
CF_FILM_%1[CR]
Set Film mode.
CF_IMAGE_%1[CR]
Set Image mode. The same as PICTURE mode
CF_DCDI_%1[CR]
Set DCDi mode
CF_ACCACM_%1[CR]
Set ACC/ACM mode.
CF_CCS_%1[CR]
Set CCS mode.
CF_MPEGNR_%1[CR]
Set MPEG NR mode.
5.
. PC control Command
Execute command
Item
CF_H-POS_%1[CR]
Set Horizontal position value.
CF_V-POS_%1[CR]
Set vertical position value.
CF_CLOCK_%1[CR]
Set Clock value.
CF_PHASE_%1[CR]
Set Phase value.
5.
. Input control Command
Execute command
Item
CF_INPUT_%1[CR]
Select Input mode.
CF_SOURCE_%1[CR]
Set Input source.
CF_SYSTEM_%1[CR]
Set system.
5.
. Screen control Command
Execute command
Item
CF_SCREEN_%1[CR]
Select screen mode. The same as WIDE mode
5.
. Time control Command
Execute command
Item
CF_PANELH_%1[CR]
Initialize panel accumulated time.
The same as CF_LAMPH
5.
. Sound control Command
Execute command
Item
CF_VOLUME_%1[CR]
Set sound value.
CF_MUTE_%1[CR]
Control Sound mutes ON/OFF.
