UK5 Specification of expanding serial command
Status command
Ver.
Rev.A
Page
28
8. 10. 17 CF_RCINHIBITION Command
Command “
”[CR]
“
”
Set up RC inhibit ON
“
”
Set up RC inhibit OFF
Detail
Set up RC inhibit ON/OFF
Available only normal Power ON condition.
Receiving RC inhibit ON command while RC inhibit ON is effective, the RC inhibit
ON keeps on effective.
Status “
” is returned
Receiving OK
“
”[CR]
Status
Receiving NG
“Error code”[CR]
8. 11 Other Command
8. 11. 1 CF_KEYEMU Command
Command
[CR]
Execute Auto PC Adj. Operation.
The same opeariton as “AUTO PC” from RC hand set.
PC Adj. Operation is interrupted receiging command while
Auto PC Adj. is working.
Detail
The same opetaion as “AUTO PC” from RC hand dest.
Receiving OK
“
０００”[CR]
Status
Receiving NG
“Error code”[CR]
8. 11. 2 CF_POWER Command
Command “
”[CR]
“
”
Turn Power ON
“
”
Turn Power Off
To confirm this command is accepted, the read command is effective.
If thermal failure is occurred, returned "000" does not work as confirmation.
Detail
Set up Power ON / OFF
Receiving OK
“
”[CR]
Status
Receiving NG
“Error code”[CR]
8. 11. 3 CF_FREEZE Command
Command “
”[CR]
“
”
Set up Freeze
“
”
Release Freeze
“
”
Select forward On → Off → On →
“
”
Select backward On → Off → On →
Since only On
Off are selectable, UP
DN is the same operation.
Detail
Set up Freeze
Available only normal Power ON condition.
Receiving Freeze command while Freeze is effective, the Freeze keeps on
effective.
Status “
” is returned
Receiving OK
“
”[CR]
Status
Receiving NG
“Error code”[CR]
