-15-
■
Adjustment
Before Adjustment
This adjustment is done to enter Service Mode by Remote
Control Unit.
■
To enter Service Mode
Quick
operation is needed to enter Service Mode.
(1) Turn the monitor on.
(2) Press and hold the MENU button on the monitor.
(3) Keep item (2) and press the STATUS button and
release the both buttons.
(4)
Within 2 seconds
after item (3), press the MUTE
button to appear the Service Mode Display.
■
Service Mode Display
■
To return to the Normal Mode
Once turn the Monitor off by pressing “POWER” button on the monitor or remote control unit and turn it on again.
MENU
OK
INPUT
VOLUME
MENU Button
MUTE
WIDE
INPUT
ON-OFF
VOLUME
PC/RGB
F
COMPONENT
OFF TIMER
PICTURE
STATUS
MOVE UP
MOVE DOWN
VIDEO
OK
OFF
ON
POWER
MENU
(
←
) / (
→
)
To select :
Adjustment Item
or Data Setting
To enter
Service Mode
STATUS
MUTE
(
↑
)
●
Adjustment :
UP
●
Data Setting
(
+
)
(
↓
)
●
Adjustment :
DOWN
●
Data Setting
(
–
)
Av-Dynamic
Cont
0
63 (3F)
Main
Sub
42H1
103
040
CAUTION
The each circuit has been made by the fine adjustment at factory. Do not attempt to adjust
the following adjustments except requiring the readjustments in servicing otherwise it may
cause loss of performance and product safety.
All manuals and user guides at all-guides.com
