Maintenance Procedures
SY75C Excavator OMM
5-74
Operation and Maintenance Manual — 0220
SANY
2. Place an appropriately sized container under the fuel
filter.
3. Open drain valve (b), to drain all water and fuel from
the filter.
4. Remove filter canister (c) by turning it
counterclockwise.
5. Remove the filter element from the filter body and
dispose of properly.
6. Replace the filter ensuring that it is securely seated
within the filter body.
7. Reinstall the new filter and canister.
8. Place a container under secondary fuel filter (d).
9. Remove the secondary fuel filter.
10. Replace the secondary fuel filter.
11. Start the engine and allow it to run at idle speed (1,050
rpm).
12. Check for leaks in the fuel system.
13. Shut down the engine.
NOTICE!
Dispose of the filter and fuel in accordance with
local environmental regulations. Failure to do so
could result in damage to the environment.
Fig. 5-118
b
c
Fig. 5-119
d
Summary of Contents for SY75
Page 2: ......
