Maintenance
SY215C LC/SY225C LC Excavator OMM
5-58
Operation and Maintenance Manual — 1219
SANY
3. Remove the fuel tank strainer element (2) from the fuel
tank filler neck.
4. Clean and inspect the fuel tank strainer.
5. Install or replace the fuel tank strainer.
6. Install and lock the fuel tank filler cap.
Check the Grab Handles and Steps
Fig. 5-74
2
1
1. Prepare the machine for service. See “Maintenance
2. Check the mounting fasteners on grab handles (1).
3. Replace any missing or damaged mounting fasteners
and tighten any loose fasteners.
4. Remove any tools, lubricants, or debris from the steps
(2). Never allow loose items to remain on the machine.
5. Clean the grab handles and steps.
Check the Hydraulic Hoses and Lines
Check all hydraulic hoses and lines for leaks. Replace damaged or leaking hydraulic hoses and lines immediately.
Make sure there is sufficient distance between all lines and hoses and the high-temperature engine components (for
example, the exhaust system).
Prepare the machine for service. See “Maintenance Safety” on page 2-8. Examine hydraulic hoses and lines for the
following:
•
Couplings that are cracked or have become loose.
•
Damage, cuts, or abrasions.
Diesel oil tank
Fig. 5-73
2
