SY215C LC/SY225C LC Excavator OMM
Maintenance
SANY
Operation and Maintenance Manual — 1219
5-49
TABLE
O
F
CONTENTS
INTRODUCTION
SAFETY
M
A
CHINE
CO
N
T
RO
L
S
MACHINE
OPE
R
A
T
IO
N
MAINTENANCE
S
PECI
F
ICA
T
IO
NS
OPT
IONAL
EQ
U
IPM
E
N
T
6. Install the oil filler cap (4).
7. Start and run the engine at low idle for several minutes
and check for oil leaks.
8. Shut down the engine, wait several minutes, then
remove the dipstick (2), note the oil level, and insert the
dipstick.
NOTE:
The oil level should be within the etched area
of the dipstick.
9. Remove the oil filler cap (2), add engine oil as needed,
then install the oil filler cap.
10. Close the engine cover (1).
Change the Engine Oil and Filter
.
1. Prepare the machine for service. See “Maintenance
2. Open the engine cover (1).
3. Loosen the engine oil filler cap (2).
WARNING!
Do not perform this procedure when the engine is hot. Wait for the engine to cool before
proceeding. Failure to follow this warning could result in burns or other serious injury.
Fig. 5-53
2
4
Fig. 5-54
1
Fig. 5-55
2
