SY215C LC/SY225C LC Excavator OMM
Maintenance
SANY
Operation and Maintenance Manual — 1219
5-57
TABLE
O
F
CONTENTS
INTRODUCTION
SAFETY
M
A
CHINE
CO
N
T
RO
L
S
MACHINE
OPE
R
A
T
IO
N
MAINTENANCE
S
PECI
F
ICA
T
IO
NS
OPT
IONAL
EQ
U
IPM
E
N
T
6. Open the drain valve (3).
7. Close the drain valve when the fuel flow is free of water and contaminants.
8. Unlock and remove the fuel tank filler cap (4).
9. Add fuel to the system as necessary.
10. Start the engine and allow it to run at low idle.
11. Check for leaks in the fuel system.
12. Repair any leaks.
13. Close and lock the right access door.
Fill the Fuel Tank
Fig. 5-71
1
1. Prepare the machine for service. See “Maintenance
2. Remove the fuel tank cap (1).
3. Add clean, fresh fuel as needed until the tank is full.
4. Install the fuel tank cap.
Check the Fuel Tank Strainer
Fig. 5-72
1
1. Prepare the machine for service. See “Maintenance
2. Unlock and remove the fuel tank filler cap (1).
NOTICE!
Dispose of the contaminated fuel in accordance with local environmental regulations. Failure
to do so could result in damage to the environment.
Fig. 5-70
4
