manualshive.com logo in svg

SANY SY115C9, Safety, Operation And Manitenance Manual

Share
Download
SANY SY115C9 Safety, Operation And Manitenance Manual Download Page 53

Safety

Safety, Operation and Maintenance Manual - Sep 2012

2-20

SY115C9/135C/155H Crawler Hydraulic Excavator

Observe the following items before per-
forming any operations. Failure to do so 
could cause machine damage, personal 
injury or death.

 

●

Never wear slack clothing and jewelry, 
which may get caught by control levers 
or other machine parts. 

 

●

Long hair can be caught in moving 
parts. Tie your hair if necessary to 
avoid such hazard.

 

●

Always have your hard hat and safety 
shoes on. Wear safety goggles, face 
masks, gloves, hearing protection and 
safety belt if necessary.  

 

●

Make sure all PPEs are in good condi-
tion before use. 

 

●

Never listen to radio or music with ear 
plugs on during operation.

 

●

Dust mask

Wear all necessary PPEs as well as other 
equipment required by your employer, local 
government, and local laws and regulations. 
Never take a risk. 

WARNING

Summary of Contents for SY115C9






























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands