manualshive.com logo in svg

SANY SY115C9, Safety, Operation And Manitenance Manual

Share
Download
SANY SY115C9 Safety, Operation And Manitenance Manual Download Page 373

Troubleshooting

Safety, Operation and Maintenance Manual - Aug 2012

6-14

SY115C9/135C/155H Crawler Hydraulic Excavator

 

●

If the machine is trapped in mud and can-
not move out of the mud with its own force, 
or the towing force of excavator is occu-
pied by heavy object, wire cables can be 
used as shown in the right illustration. 

 

●

Place wood blocks or other protective 
materials between where the wire cable 
contacts the machine in order to prevent 
friction between the wire cable and the ma-
chine. 

 

●

Keep the wire cable parallel to the ground 
and align its direction with that of the track 
frame. 

 

●

Move at a speed of 1Km/h when towing 
the machine. Tow the machine to a place 
suitable for repair. Never tow the machine 
over a long distance. 

 

●

Towing of the machine is only allowed in 
case of emergency. 

CZ335-1103216

CZ335-1103217

Fig. 6-8 

Fig. 6-9 

Summary of Contents for SY115C9






























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands