manualshive.com logo in svg

SANY SY115C9, Safety, Operation And Manitenance Manual

Share
Download
SANY SY115C9 Safety, Operation And Manitenance Manual Download Page 205

Operation

Safety, Operation and Maintenance Manual - Sep 2012

4-16

SY115C9/135C/155H Crawler Hydraulic Excavator

2

CZ335-1103140

Fig. 4-23 

(D) Armrest angle adjustment

Turning the plate (4) beneath armrest (3) can 
adjust the angle of armrest to desired position. 

The armrest can be placed vertically so that 
the operator could leave the seat easily. 

Adjustable angle: 40°

4

3

CZ335-1103141

Fig. 4-24 

(B) Backrest adjustment

Lift lever (2), move the backrest to an optimum 
position at where operation can be easily con-
ducted, and release the lever. 

Make sure the backrest does not interferes 
with the cover plate of the air conditioner at 
rear when adjusting the inclination of backrest. 
Be careful with the control levers, which shall 
not be touched by armrest. 

(C) Height adjustment

The seat can be raised by 30 mm when you 
hear a "click" sound, and another 30 mm at 
the second "click". The seat can be lowered to 
the minimum height if you continue to raise it. 

Adjustable height: 60mm (30mm for each ad-
justment)

Summary of Contents for SY115C9






























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands