MANUALE
D’USO
SUNWAY
TM
SI
87/156
3. Feed the positive and cathode cables into corresponding lock screws.
4. Put the metal positive and cathode terminals into positive cable and
cathode cable whose insulated enclosure has been stripped, and crimp
them tightly with a wire crimper. Make sure that the withdrawal force of the
pressed cable is bigger than 400N.
5. Plug the pressed positive and cathode cables into relevant insulated
enclosure, a “click” sound should be heard or felt when the contact cable
assembly is seated correctly.
6. Fasten the lock screws on positive and negative connectors into
respective insulated enclosure and make them tight.
7. Connect the positive and cathode connectors into positive and negative
DC input terminals of the inverter, a “click” sound should be heard or felt
when the contact cable assembly is seated correctly.
1. Connection port
Figure 5.14 Connect the inverter
NOTICE
· Before inserting the connector into DC input terminal of the inverter, please make
sure that the DC switch of the inverter is OFF.
·Please use the original MC4 terminal to install.
