MANUALE
D’USO
SUNWAY
TM
SI
73/156
between -40°C
～
+60°C(-40° F
～
140° F)to ensure optimum operation.
Choose locations with sufficient air exchange. Ensure additional ventilation,
if necessary.
To make sure the installation spot is suitably ventilated, if multiple
ENERTRONICA SANTERNO on-grid solar inverters are installed in the
same area, the following safety clearance in Figure 4.2 shall be followed for
proper ventilation conditions.
30
CM
50CM
50CM
30CM
30
CM
4.2 Installation position
4.4 Mounting Procedure
4.4.1 Mark the Positions of the Drill Holes of the Rear Panel
The mounting position should be marked as shown in Figure 4.3,Figure
4.4,Figure 4.5.
