SUNWAY
TM
SI
MANUALE
D’USO
72/156
4.3 The Determination of the Installation Method and
Position
4.3.1 Mounting Method
Figure 4.1 Mounting method
①
The equipment employs natural convection cooling method, and it can
be installed indoor or outdoor.
②
Please install the equipment under the guidance of Figure 4.1. Vertical
installation on floor level is recommended. Mount vertically or tilted
backwards by max. 15°. Never install the inverter tilted forwards, sideways,
horizontally or upside down.
③
Considering convenience for maintenance, please install the equipment
at a position in parallel with line of sight.
④
When mounting the inverter, please consider the solidity of wall for
inverter, including accessories. Please ensure the Rear Panel tightly.
Before installation, make sure that the wall has enough strength to hold the
screws and bear the weight of the equipment.Please make sure the
equipment is installed properly.
4.3.2 Installation Position
Do not expose the inverter to direct solar irradiation as this could cause
power derating due to overheating. The ambient temperature should be
