MANUALE
D’USO
SUNWAY
TM
SI
57/156
inverter. Operators must be aware of the high-voltage device.
Chapter 2 Preparation
2.1 Safety Instructions
DANGER
· There is possibility of dying due to electrical shock and high voltage.
· Do not touch the operating component of the inverter, it might result in burning or
death.
· To prevent risk of electric shock during installation and maintenance, please
make sure that all AC and DC terminals are plugged out.
· Do not touch the surface of the inverter while the housing is wet, otherwise, this
may cause electrical shock.
· Do not stay close to the inverter while there are severe weather conditions
including storm, lighting, etc.
· Before opening the housing, the ENERTRONICA SANTERNO inverter must be
disconnected from the grid and PV generator; you must wait for at least five
minutes to let the energy storage capacitors completely discharged after
disconnecting from power source.
WARNING
· The installation, service, recycling and disposal of the inverters must be
performed by qualified personnel only in compliance with national and local
standards and regulations.
· Any unauthorized actions including modification of product functionality of any
form may cause lethal hazard to the operator, third parties, the units or their
property. ENERTRONICA SANTERNO is not responsible for the loss and these
warranty claims.
· The ENERTRONICA SANTERNO inverter must only be operated with PV
generator. Do not connect any other source of energy to the ENERTRONICA
SANTERNO inverter.
· Be sure that the PV generator and inverter are well grounded in order to protect
