SantaMedical RY210, Manual

Page: 13 / 17

12
You can also use the SantaMedical RY210 to measure the temperature
of an area or an object, a food, a liquid or a room temperature.
For this, use the SURFACE TEMP mode.
Measurement range for Surface TEMP mode: 0
ć
-60
ć
(32
̧
-140
̧
)
Press PROG SETTING button for 3 seconds, the screen displays: F1.
Press PROG SETTING button twice to get F3.
Select 0 by pressing “-” button to get the BODY mode.
Select 1 by pressing “+” button to get the SURFACE TEMP mode
Confirm by pressing PROG SETTING button.
5.TATAL DIFFERENCE – F4 MANU
Press PROG SETTING button for 3 seconds, the screen displays: F1.
Press PROG SETTING button three times to get F4.
Select “+” to increase the difference by 0.1
ć
(0.1
̧
), “-” to reduce it by
0.1
ć
(0.1
̧
).
Confirm by pressing PROG SETTING button.
If in doubt, you are advised to leave the total variance at + 0.0
ć
(original setting).
Each time there is a significant change in the ambient temperature due
to a change in environment, to allow the RY210 to acclimatize to
this ambient temperature for at least 15 minutes before using it.
Note: The SantaMedical RY210 is automatically set to BODY
Important: The area temperature differs from the internal body
temperature. To obtain the internal temperature always use the
BODY mode.
Please make sure to select the BODY mode for an internal
temperature reading and the SURFACE TEMP mode for an external
area reading (bottle, bath, Room…).
To adjust total variation of your SantaMedical RY210