Sans Digital AccuSTOR AS424X12, Hardware Detailed User'S Manual

Page: 68 / 76

Installation Guide
60
7. You can also cancel the program step by type ‘q’.
8. If transfer OK, the transfered data is updated. Cold-start expander (Power
cycle again) to take effect.
Example:
Update procedure, use Xmodem to transfer, refer to “fdl” command
for detail operation.
CLI> fdl { code | mfgb }
Use HyperTerminal or TeraTerm utility with Xmodem mode to transfer and
update files.
If transfer OK, the transfered data is updated. Cold-start expander (Power cycle
again) to take effect.
The following firmware and data are available in the following filename format.
1. FW file (CODE) : sas3xfwYYMMDD.fw
2. Data file (MFGB) : mfg12gYYMMDD.rom
Update SAS expander firmware:
CLI> fdl code
Use HyperTerminal or TeraTerm utility with Xmodem mode to transfer
sas3xfwYYMMDD.fw.
If transfer OK, the transfer data is updated. Cold-start expander (Power cycle
again) to take effect.
Update SAS expander data file:
CLI>fdl mfgb
Use HyperTerminal or TeraTerm utility with Xmodem mode to transfer
mfg12gYYMMDD.rom.