Installation Guide
48
Slot07 Temp
09
32
60
5
No
Slot08 Temp
10
35
60
5
No
Slot09 Temp
11
34
60
5
No
Slot10 Temp
12
32
60
5
No
Slot11 Temp
13
32
60
5
No
Slot12 Temp
14
33
60
5
No
GROUP Command
The group command is used to associate the external port with the devices/phys
as one zone group. The three external cable ports and all devices/phys slots will
default associate with one zone group.
Syntax
gr {dev GroupNo[1..] {ci, cj, ck,..} Start-Index(D) End-Index(D)}
gr {off | [t10 off] }
dev : use drive slot index
GroupNo : groupno start from 1, max 8 groups ci, cj, ck,..:
external cable connector. i, j, k,.. is the index which range from 0 to 3. According
to view from connector side, index start from right to left or top to bottom. The
cable c0, c1, or c2 is view from right to left or start from top to bottom.
Start-Index : Start slot index of zone range, [1.. max drive]
End-Index : End slot index of zone range, [1.. max drive]
off : clear the zone group setting.
t10 off : turn T10 mode off.
Example:
CLI>gr
Current PHY Group Mode: T10
Group-1: C0, C1, C2, Slot: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16
Value: 0x0000000FFFFFFFFF
Summary of Contents for AccuSTOR AS424X12
Page 1: ......
Page 8: ......
Page 40: ...Installation Guide 32 Step 2 Open HYPERTRM EXE ...
Page 43: ...Appendix C Command Line Interface 35 Step 7 Open the Settings Tab ...
