Sans Digital AccuSTOR AS424X12, Hardware Detailed User'S Manual

Page: 32 / 76

Installation Guide
24
Removing the Fan Module from
AS316X12(R) and AS424X12(R) :
Remove the Fan modules by slide the
release button left and pull the module out
of system.
Replace the Fan in Fan module
1.
There are two failure LEDs on the rear
of Fan module. Check which LED
lights to yellow.
2.
Remove the Fan modules by anti-
clock wise to release the thumb screw
then slide it back and lifting off.
3.
Release the screw to remove the
defect fan.
4.
Insert the spare Fan and fasten the
screw.
Removing the Fan Module from
AS212X12(R) & AS224X12(R)
JBOD :
Remove the Fan modules by slide the
release button left and pull the module out
of system,
push
Pull out
Pull out
push