Installation Guide
50
Group-2: C1, C2, Slot: 7, 8, 9, 10, 11, 12, 13, 14, 15, 16
Value: 0x000000000FF003FF
//Clear the Zone group Setting
CLI>gr off
New PHY Group Mode: T10
Group-1: C0, C1, C2 Slot: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16
Value: 0x0000000FFFFFFFFF
Current PHY Group Mode: T10
Group-1: C0, Slot: 1, 2, 3, 4, 5, 6
Value: 0x00000000000FFC00
Group-2: C1, C2, Slot: 7, 8, 9, 10, 11, 12, 13, 14, 15, 16
Value: 0x000000000FF003FF
SYS Command
The sys command is used to view the expander’s information. Typical
information includes: vendor, model name, serial/unit number, expander port
number, product revision, chip name/chip revision, customer code, manufacture
data revision and work time.
Syntax
CLI>sys [Enter]
Example:
CLI>sys
========================================
Hardware Revision Information:-
========================================
Vendor ID : AccuSTOR
Taiwan, R.O.C
Model ID : AN612
Serial No. : 0000000000000000
Unit Serial No. :
Summary of Contents for AccuSTOR AS424X12
Page 1: ......
Page 8: ......
Page 40: ...Installation Guide 32 Step 2 Open HYPERTRM EXE ...
Page 43: ...Appendix C Command Line Interface 35 Step 7 Open the Settings Tab ...
