Sanremo 6713, Instruction Booklet

Page: 10 / 96

YOU Important safeguards
10
- THE DEVICE CAN BE USED BY
UNTRAINED PERSONNEL ONLY
UNDER THE SUPERVISION OF
PERSONNEL IN CHARGE OF ITS
USE.
- DO NOT USE THE DEVICE
WITH WET HANDS OR WHEN
BAREFOOT.
- DO NOT ALLOW UNAUTHORISED
AND UNQUALIFIED PERSONNEL
TO START, ADJUST OR REPAIR THE
MACHINE.
- THE MACHINE MUST BE
INSTALLED IN A PLACE WHERE
IT IS SUPERVISED BY TRAINED
PERSONNEL.
- IT IS FORBIDDEN TO USE WATER
JETS TO CLEAN THE MACHINE.
- THE OPERATING TEMPERATURE OF
THE MACHINE RANGES BETWEEN
41 AND 89°F.
- AUTHORISED AND QUALIFIED
TECHNICAL PERSONNEL
MUST HAVE THE NECESSARY
KNOWLEDGE OF HYGIENE AND
SAFETY FOR THE CORRECT USE
OF THE APPLIANCE.
- REFER TO THIS MANUAL FOR ALL
NECESSARY OPERATIONS.
- BEFORE CLEANING AND/
OR SERVICING THE MACHINE
AND BEFORE REMOVING ANY
GUARD, MAKE SURE THAT THE
MAIN SWITCH IS ON “OFF”
(O) , SO THAT POWER SUPPLY
IS DISCONNECTED FROM
THE MACHINE DURING THE
OPERATION.
- CLEAN THE MACHINE DAILY, FOR
AN IN-DEPTH EXPLANATION REFER
TO THE 'CLEANING' PARAGRAPH.
- POWER SUPPLY GRID OF
THE PURCHASER MUST BE
FITTED WITH AN AUTOMATIC
BREAKER UPSTREAM OF THE
MACHINE MAIN SWITCH
WITH A CONTACT OPENING
DISTANCE ACCORDING
TO THE DISCONNECTION
SPECIFICATIONS FOR
OVERVOLTAGE CLASS III WELL AS
A SUITABLE GROUNDING SYSTEM
MEETING ALL THE REQUIREMENTS
OF THE INJURY PREVENTION
STANDARDS.
- DO NOT USE ADAPTORS,
MULTIPLE PLUGS AND/OR
EXTENSIONS.
- DO NOT USE THE MACHINE IF
THE POWER CABLE IS FRAYED OR
DAMAGED. FOR REPLACEMENT,
CONTACT YOUR LOCAL DEALER
OR THE MANUFACTURER.
- IF OPERATIONS ARE REQUIRED
ON OR NEAR THE MAIN SWITCH,
DISCONNECT POWER FROM
THE LINE TO WHICH THE MAIN
SWITCH IS CONNECTED.