Sanremo 6713, Instruction Booklet

Page: 36 / 96

YOU Programming
36
NOTE: in case of time slots and
STANDBY timer enabled at the
same time the latter will not be
considered. The active time slot is
highlighted in orange.
The mode is indicated by the red LED on the display;
to exit the mode, briefly activate the steam lever or
the hot water lever and wait a few seconds;
SELECTIVE SWITCH-OFF OF MACHINE SECTIONS
Through this option it is possible to disable some
sections of the machine:
-total switch-off of service boiler: it allows turning
off only the steam and hot water generation boiler
when the user needs to dispense only coffee, thus
allowing a selective reduction in consumption;
-coffee boiler switch-off: it allows turning off only the
coffee dispensing circuit (boiler and group) in case
the user needs to dispense only hot water/steam,
thus allowing a selective reduction in consumption;
-total switch-off: it sets the machine to OFF.
The energy saving icon can appear in the following
ways:
1) grey leaf = energy saving disabled;
2) white leaf = STANDBY mode enabled;
3) green leaf = ECO mode at low temperatures in
progress (the display will have a low brightness);
4) ON/OFF 24h white icon = timer programmed
and enabled.
2
1.3 93.7°
BAR C
2
1.3 93.7°
BAR C
2
1.3 93.7°
BAR C
2
1.3 93.7°
BAR C
11.2 USER QUICK MENU
Press the USER icon to access the quick menu for
configuring important parameters for the user:
User settings
Lights
Service parameters
Star washing
In this menu it is possible to:
• enable / disable the LED lights;
• set the outlet intensity and duration of hot water
dispensing;
• set the temperature setpoint of the dispensing
group and of the coffee boiler;
• set the steam boiler pressure setpoint;
• carry out a washing cycle.
• enable / disable the purge of the steam;
The “Service parameters” allow changing the hot
water intensity by entering “Hot water dispensing”:
increasing (+) the displayed percentage will
increase the outlet water temperature, decreasing it
(-) will decrease the outlet water temperature.