SANKI S-CON BABY SBF, Operating And Service Manual

Page: 13 / 32

13
Machine
length L
(mm)
Installation interval (mm)
Quantity of
stands
per machine
A B C D E
2,400 300 1,500 200 － － 2
2,900 300 2,000 200 － － 2
3,400 300 2,500 200 － － 2
3,900 300 2,900 300 － － 2
4,400 300 3,400 300 － － 2
4,900 300 3,900 300 1,900 2,000 3
5,400 300 4,400 300 1,900 2,500 3
5,900 300 4,900 300 2,400 2,500 3
6,400 300 5,400 300 2,900 2,500 3
6,900 300 5,900 300 3,400 2,500 3
3-3. INSTALLING STANDS (OPTIONAL)
1. Installation of horizontal fixed stand (EG30 model) and horizontal portable stand (EC30 model)
Install horizontal fixed stand (EG30 model) or horizontal portable stand (EC30 model) to frame by fixing
stand brackets to frame undersides with attachment bolts and nuts (2 sets on each side), as shown in
figure right. For stand installation intervals, see table below.
● Installation of horizontal fixed stand (EG30 model)
and horizontal portable stand (EC30 model)
Belt surface
H
1
±
30
▼ EG30 model
300
H
±
30
H
1 H
Belt surface
300
▼ EC30 model
● Installation positions of EG30 and EC30 models
2. Installation of portable inclining stand (Bevel gear type BH30 model)
Portable inclining stand (BH30 model) is to be fixed to conveyor frame at four points. Install stand as
follows:
Keep head u
nit raised. (→See the top figure on next page.) On both sides of conveyor, hold stand pipes
with attachment pieces (A) and (B) as shown in figure right. Then fix attachment pieces (A) and (B) to
frame undersides with attachment bolts and nuts(2 sets at 4 points).
● Installation of portable inclining stand (BH30 model)
280 120
Ａ Ｂ Ｃ
Ｄ Ｅ
Machine length L