ENGLISH
How to assemble and use
Follow these simple steps for easy and
effective operation of the Backpack vacuum.
Open the lid and ensure that the cloth bag is correctly
located and the flexible ring provides a proper seal when
the lid is closed. For optimum performance, filtration and
maximum hygiene, it is advisable to use a paper vacuum
bag in addition to the standard cloth bag.
1. The vacuum hose is fitted into the cuff in the lid (Fig.1).
It should not be necessary to remove the hose in normal
operation.
2. Place the Backpack vacuum on your back, adjust the
shoulder straps until you feel comfortable and then
tighten the waist belt. The Backpack vacuum is designed
to ride higher on your back for maximum comfort (Fig. 3).
3. Plug the cord into a 110 volt, grounded outlet. Always
unwind the cord completely before vacuuming. It is
important to maintain the power cord in good condition.
This unit ships with a 50’ 16/3 SJT power cord. Use care
when pulling the cord around sharp edges and through
doorways.
4.
Never operate the Backpack vacuum if the power
cord is damaged in any way.
5. Attach the extension wand to the hose (Fig. 2) and fit the
wands (Fig. 4) and floor tool (Fig. 5) or any other vacuum
accessories.
6. Turn the vacuum on. The toggle switch is located on the
switch box. The switch box is affixed to the waist belt.
7. After you finish cleaning, turn off the main power switch
and unplug the cord from the wall outlet. Then starting
from the Backpack vacuum, wrap up the cord to store.
Be careful not to pull or yank on the vacuum cleaner’s
power cord.
6
1
3
4
5
2
