COPY/PASTE DAY
To speed up the programming sequence you can copy
one day into another, or several other, days.
1. Press
Set
x2
to enter copy mode.
2. Choose the ‘Copy’ day using
▲
and press
Ok.
3. Choose the ‘Paste’ day using
▲
and press
Ok.
4. Repeat step as required for further ‘Paste’ days
At any point Press
Ok x2 to return to Run Mode
RESET UNIT
To erase all current settings and return to it’s factory
default settings & programs.
1. Press and hold
Ok
and
▼
for 6 seconds.
2. When Reset is displayed push in the
Reset
button.
3. All segments on the display are shown to confirm
reset has taken place.
PROGRAMMING
Within programming mode the thermostat will return
to normal operation if no buttons are pressed for 30
seconds.
To exit programming mode either wait 30 seconds or
press
Set
x2 and
Ok.
NB: Each day’s end time is 11:59 in 12hr or 23:59 in 24hr
formats. P6 should never be set for midnight as this will
cause an error in programming.
Each day of the week can be programmed separately,
starting with Monday (Mo)
1. Press
Set
to enter programming mode.
2. Set Mo MORN temperature using
▼▲
and press
Ok.
3. Set Mo MORN time using
▼▲
and press
Ok.
4. Set Mo DAY temperature using
▼▲
and press
Ok.
5. Set Mo DAY time using
▼▲
and press
Ok.
6. Repeat procedure for all 6 set points in the day and
continue on to program each day of the week.
At any point Press
Set x2
then
Ok to return to Run Mode
Prog
is shown at the
top of the display
Copy Prog
is shown at
the top of the display
