MORN
DAY
Noon Break
EVEN
NIGHT
NIGHT
CUSTOM PROGRAM cont...
Below shows the programming segments of the default program on a Weekday.
Held over from previous
day’s setting
.
Essentially, if the thermostat reads the temperature below the chosen temperature it will
send a message for the boiler to fire and your heating to come on.
The above diagram shows how the day is split up into named parts but BOTH the times
and temperatures are changeable. Using the programming instructions that follow you
can set the time each part starts and the temperature it will set to at that point. As can be
seen the NIGHT setting carries over & stays until the MORN time the following day.
If you don’t need a certain program to be there, for example you do not require Noon as
no one is home at that time of the day, then you simply set that program for the same
temperature as the one before - as it cannot be deleted. There must be 6 programmed
events each day even if they are set to the same temperature.
Mo - Fr
Time
°C
1: MORN
2: DAY
3: Noon
4: Break
5: EVEN
6: NIGHT
Sa - Su
Time
°C
1: MORN
2: DAY
3: Noon
4: Break
5: EVEN
6: NIGHT
CREATING YOUR PROGRAM
Use the grids below to plan out your own custom program before you start.
2am
6am
10am
2pm
6pm
10pm
6:00am 8:30am
12:00pm 2:00pm 4:30pm
10:30pm
