Sangamo Choice RSTAT5 RF, User Instructions, Page: 6 / 8

CHANGE THE TEMPERATURE FOR A SET NUMBER OF HOURS
You can also set the thermostat to hold at the temperature you want for a defined
number of hours.
1. Press M to enter override mode then select temperature using
▼▲
and press Ok.
2. Select number of hours using
▼▲
and press Ok.
3. Comfort Override, Temp. Set & Hours, with the hours remaining, are shown on the
display.
To cancel setting and return to normal operation press Ok.
CHANGE THE TEMPERATURE
To manually change the temperature temporarily you simply press the raise or lower
buttons to the desired level, if left alone this will stay set until the next programmed
change at which point it returns back to the original schedule.
1. Choose desired temperature using ▼▲
To cancel setting early and return to normal operation press Ok.
Temporary Override
is shown above the
time on the display
Comfort Override
is shown above the
time on the display.
Time changes to
countdown of the
remaining hours and
minutes.