![background image](http://html1.mh-extra.com/html/heat-iq/hiq-424/hiq-424_instructions_2115862001.webp)
HIQ 424
Programmable Wireless Thermostat
Range up to 30m inside dwelling
Power two x AA batteries
Range 5 to 50 deg C
Functional Description
1 = Power - on / Anti frost /off 5 = Reset (use pin)
2 = Time setting 6 = Plus/add
3 = Program setting 7= Minus/lower
4 = Confirm/ Exit
Press Power on
Set Time/day
Press
2
to enter setting - time - use up and down to set current minutes -
3
– hour -
3
day - Press
4
to confirm and exit.
Programing The default for this unit is 7 Days 6 set points
All seven days need to be programmed in using the following method the pattern can be different for each day of the week
Using button
1
select Using Schedule,
temperature will display in top right f screen with using schedule below.
Press 3 - set day – press 3 set switching time for period 1– press 3 - set temperature required for period 1
Press 3 - again to move on to period 2 and so on- set as required until all six daily switch times are set
Press 4- to finish and lock in settings
Use this chart to set our your chosen programming before entering
Set point
Get up
Deg
C
Out to
work
Deg
C
Lunch
home
Deg
C
Lunch
out
Deg
C
Evening
home
Deg
C
Bedtime Deg
C
Example
06.30
19
09.00
15
11.45
19
12.45
15
16.00
21
21.30
7
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Permanent override
To permanently set a temperature press 3- for 3 seconds to enter permanent hold - set using 6-7 (up down)
The thermostat will hold this temperature until you press- 4 to escape permanent mode.
Temporary override.
In normal operation simply use 6-7 (up/down) to change the set temperature the temperature selected will remain until the
next switching point.
Battery low
A battery symbol will flash for up to 30 days until the battery is replaced Replace the batteries with two AA as soon as possible.
Key lock
Reset to factory default
Press and hold - 4 for three or more seconds
Full reset
- if the display becomes scrambled use a paperclip to press -5
Key lock
– Press and hold up down keys for three seconds- repeat to release
More information including advanced
programming can be obtained from the
detailed instructions included