background image

PRODUCT DATA

68-0075-2

® U.S. Registered Trademark
Copyright © 2003 Honeywell International Inc.
 All Rights Reserved 

T834C, T8034C

Heating/Cooling Thermostats

APPLICATION

T834C and T8034C Thermostats provide low voltage control 

of single-stage heating, cooling or heating-cooling systems.

FEATURES

• Integral switches control Heat-Off-Cool System 

switching and Auto-On or On-Auto Fan switching.

• Standard heating-cooling, single-stage heat pump, and 

electric heat models available.

• Coiled bimetal operates silent, dust-free spdt mercury 

switch.

• T834C models have vented cover to provide better air 

flow for temperature sensing.

• Adjustable heat anticipator and fixed cool anticipator 

on all models.

• T834C models mount directly on wall or on a 

vertical

 

outlet box.

• T8034C models mount directly on wall or on a 

horizontal 

outlet box.

• SUPER TRADELINE® T8034C includes horizontal 

wallplate for covering marks from old thermostat.

• Accessory mounting plate assembly allows mounting 

T834C on horizontal outlet box or T8034C on vertical 

outlet box.

Contents

Application.........................................................................1

Features ............................................................................1

Specifications ....................................................................2

Ordering Information .........................................................2

Installation .........................................................................3

Settings and Adjustments..................................................7

Checkout ...........................................................................8

Summary of Contents for T834C









Reviews: