Saneo 4SPORT, Instruction Manual

Page: 57 / 60

57
E
Stimulation intensity cannot be set higher than
10mA and falls back to 0 mA
•
The lead wires have to be connected with the Bodypack and
the electrodes and the electrodes have to be placed correct-
ly so that a stimulation is possible.
•
Renew the adhesiveness of the electrodes by moistening.
If the adhesive surface of the electrodes is used up, the
current distribution is not ensured any more. Please replace
the electrodes.
•
Change to a bigger electrode size..
No noticeable stimulation
•
Start again the Bodypack together with the App.
•
Check the electrode position. The electrodes must not over-
lap and have to adhere to the skin with the entire surface.
•
Increase the stimulation intensity step by step.
•
Check the cable connection between the Bodypack and the
electrodes.
•
Renew the adhesiveness of the electrodes by moistening.
If the adhesive surface of the electrodes is used up, the
current distribution is not ensured any more. Please replace
the electrodes.
Error and troubleshooting