CP3005 – User Guide Rev. 1.8
// 93
12.3.4.2.
Removing a M.2 Card
To remove a M.2 card:
1.
Power off the board, and then detach the power cord from the power supply.
2.
Remove the CP card.
3.
Remove the screw and washer securing the M.2 card and M.2 holder.
4.
The M.2 card pops up. Grasp it by the edges and slide it out.
Figure 38: Removing a M.2 Card
12.3.4.3.
Installing a M.2 Card
To install a M.2 card:
1.
Align the connector on the M.2 with the connector on the board. Make sure the slits are aligned with the
protrusions on the connector.
2.
Insert the M.2 card into the connector on the server board.
3.
Install the washer.
4.
Secure the M.2 card holder with the screw.
