CP3005 – User Guide Rev. 1.8
// 41
3.9.8.
SATA Interfaces
The CP3005 provides six SATA ports:
One SATA 6 Gb/s port on the onboard standard, 7-pin SATA connector, J3, for connection to SATA devices via
cable,
One SATA 6 Gb/s port on the onboard M.2 Card connector for connection a SATA SSD device.
One SATA 6 Gb/s port for the 2.5” HDD/SSD on the MMEXT05 extension module (8HP),
One SATA 6 Gb/s port for a M.2 SSD on the MMEXT05 or MMEXT_XMC02 extension module (8HP),
Two SATA 3 Gb/s ports on the CompactPCI rear I/O interface.
All six SATA interfaces provide high-performance RAID 0/1/5/10 functionality.
3.9.9.
Debug Interface
The CP3005 provides several onboard options for hardware and software debugging, such as:
Four bicolor general purpose LEDs (LED0 to LED3), which indicate hardware failures, uEFI BIOS POST codes
and user-configurable outputs
One JTAG connector, J13, for programming the onboard logic
One CMC 35-pin ITP adapter port with XDP connector for processor debugging (J15)
Two USB2.0-based debug ports, J5 and J6, for facilitating the debug of the operating system and the device
driver
