40
GB
Hints and Tips
If a problem does occur, it may often be due to something very minor. The following table
contains various tips.
Symptom
Cause / Solution
No power.
•
Ensure the car power adapter or the mains adapter is
connected.
•
Make sure that the unit is turned on.
•
Make sure that you select ON mode.
The remote control
does not function.
•
Use the remote near the unit.
•
Point the remote at the remote sensor on the unit.
•
Replace the battery in the remote with a new one.
•
Make sure the plastic sheet has been removed from the
remote control.
•
Remove any obstacles between the remote and the unit.
Very little or no
sound is coming
from a DVD.
•
Make sure the unit is not paused. Press the button.
•
Make sure the unit is not in fast-forward or fast-reverse mode.
Press the button.
•
Make sure the AUDIO/VIDEO input/output connections are
correct.
•
The DTS DVD cannot be decoded to have speaker output.
Press the AUDIO button repeatedly to switch to other
languages recorded on the disc.
•
The unit has overheated. Shut it off for 30 minutes to allow it
to cool down.
•
The volume is too low. Increase the volume.
No picture.
•
The region number of the disc doesn’t match the region
number of this unit.
The picture is not
clear.
•
The DVD is dirty. Gently clean the disc.
•
The disc is scratched.
•
Adjust the LCD display brightness (see VEDIO SETUP PAGE).
Loud hum or noise
is heard.
•
The plugs and sockets are dirty. Wipe them with a cloth slightly
moistened with alcohol.
•
Clean the disc.
