27
GB
ON
OFF
AV OUT
DC
OUT
DC
IN
9~12V
AV IN
Listening on an External Audio Device
1. Connect the DVD player to the left/right Audio IN sockets on the audio device by using
the included 3.5mm to RCA AV Converter and a standard RCA Stereo Audio Cable (not
included).
2. Turn on your audio device and follow the instructions provided with it to select the
AUDIO IN function.
Using Earphones
Turn down the volume before connecting the headphones/earphones. Slowly raise the
volume with the headphones/earphones on until you reach your desired volume. When
headphones/ earphones are connected, the speaker is automatically disabled.
DVD player
left side
Headphones / Earphones
[1/8” (3.5mm) diameter plug] (included)
• Make sure the correct Audio cable is used. Connecting the plugs incorrectly may cause a weak signal.
• If you have a stereo VCR, make sure you set it to stereo mode.
• Due to copyright protection, DVD movies cannot be copied. If you copy a DVD movie onto a
videotape, the resulting copy will be unclear, with poor sound quality. This is NOT caused by a
defective DVD system.
Long-term exposure to loud music may cause
hearing damage. It is best to avoid extreme
volume when using earphones, especially for
extended periods of time.
RCA stereo
audio Cable
(not included)
ON
OFF
AV OUT
DC
OUT
DC
IN
9~12V
AV IN
DVD player
left side
3.5mm to RCA
AV Converter
(included)
To AV OUT
socket
Stereo Receiver
/ Amplifi er
Yello
w
DO NO
T C
ONNEC
T
Red
W
hit
e
Red
W
hit
e
Conecting to a Multi-channel Audio Receiver
For better sound quality, you may want to play the DVD audio throught your multi-channel
audio receiver. (DVD mode)
