22
GB
1. Align the angled support’s bolt to the screw
hole on the back of the DVD unit. Turn the bolt
clockwise and secure the support.
Mounting the DVD in a Car
Use the supplied mounting kit to install the DVD players on the back of the vehicle’s
headrests.
2. For car headrests which can be removed, use the following method:
Lift the headrest off its leg supports. Align the horizontal support with the headrest
leg slots and ensure the horizontal support rests securely on the top of the car seat.
Reattach the headrest.
Headrest
Leg
support
Horizontal
support bar
Horizontal
support bar
3. For car headrests which cannot be removed, use the following method to secure the
car mount:
Unscrew the bolts holding the horizontal mounting bar together. Slip both halves
of the mounting bar around the headrests’ leg supports. Screw in the bolts, loosely.
Ensure that the mounting bar is level. Tighten the bolts.
• If the set of 4 x screws (ø4 x 20mm) is not long enough to secure the horizontal support bar to the leg
supports, please use the longer set of screws (ø4 x 25mm).
Support
